s5343 to S5345 , s9073 to s9075 features l high sensitivity and low noise in uv to visible range applications l low-light-level measurement l analytical equipment photodiode si apd short wavelength type apd general ratings / absolute maximum ratings absolute maximum ratings effective active * 2 area size effective active area operating temperature topr storage temperature tstg type no. dimensional outline/ window material * 1 package (mm) (mm 2 ) (c) (c) s9073 0.2 0.03 s9074 0.5 0.19 s5343 ? /u to-18 1.0 0.78 s9075 1.5 1.77 s5344 ? /u to-5 3.0 7.0 S5345 ? /u to-8 5.0 19.6 -20 to +60 -55 to +100 electrical and optical characteristics (typ. ta=25 c, unless otherwise noted) breakdown voltage v br i d =100 a dark * 3 current i d spectral response range peak * 3 sensitivity wavelength p photo sensitivity s m=1 =620 nm quantum efficiency qe m=1 =620 nm temp. coefficient of v br cut-off * 3 frequency fc r l =50 ? terminal * 3 capacitance ct excess * 3 noise figure x =650 nm gain m =650 nm type no. (nm) (nm) (a/w) (%) typ. (v) max. (v) (v/c) typ. (na) max. (na) (mhz) (pf) s9073 900 3 s9074 400 7 s5343 0.2 5 250 15 s9075 0.5 15 100 30 s5344 1 30 25 120 S5345 200 to 1000 620 0.42 80 150 200 0.14 3 100 8 320 0.28 50 *1: u: uv glass *2: area in which a typical gain can be obtained. *3: values measured at a g ain listed in the characteristics table. 1
si apd s5343 to S5345, s9073 to s9075 spectral response quantum efficiency vs. wavelength dark current vs. reverse voltage gain vs. reverse voltage 20 30 0 10 photo sensitivity (a/w) (typ. ta = 25 ?c) wavelength (nm) 200 400 600 800 1000 m = 10 m = 20 m = 50 0 20 40 60 80 100 quantum efficiency (%) (typ. ta=25 ? c) wavelength (nm) 200 400 600 800 1000 kapdb0010ed kapdb0023eb kapdb0009ed kapdb0011ec 0 100 200 50 1 pa 10 pa 100 pa 1 na 10 na 150 reverse voltage (v) dark current s5344 s9075 s5343 s9074 s9073 S5345 (typ. ta = 25 ? c) gain reverse voltage (v) 10 3 10 2 10 1 10 0 130 160 140 150 (typ. = 650 nm) -20 ? c 0 ? c 20 ? c 40 ? c 60 ? c 2
si apd s5343 to S5345, s9073 to s9075 terminal capacitance vs. reverse voltage kapdb0015ec reverse voltage (v) terminal capacitance 0 100 1 nf 200 100 pf 1 pf 50 10 pf 150 (typ. ta = 25 ? c , f = 1 mhz) S5345 s5344 s5343 s9075 s9074 s9073 excess noise figure vs. gain kapdb0013ea excess noise figure gain 10 1 1 10 100 (typ. ta = 25 ? c, f = 10 khz, b = 1 hz) m 0.2 m 0.5 m 0.3 = 650 nm = 800 nm 3
si apd s5343 to S5345, s9073 to s9075 hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, http://www.hamamatsu.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 08152 -3750, fax: (49) 08152-2658 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, t elephone: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv ? gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8-509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?2004 hamamatsu photonics k.k. (20) 4.2 0.2 2.8 0.45 lead 8.1 0.1 photosensitive surface 9.1 0.2 5.08 0.2 case 1.5 max. 0.4 max. window 5.9 0.1 the glass window may extend a maximum of 0.2 mm beyond the upper surface of the cap. cat. no. kapd1001e05 apr. 2004 dn 13 3.6 0.2 0.45 lead 4.7 0.1 5.4 0.2 2.54 0.2 case photosensitive surface window 3.0 0.2 1.2 max. 0.4 max. 2.8 the glass window may extend a maximum of 0.1 mm beyond the upper surface of the cap. index mark 1.4 1.0 max. (15) 4.9 3.1 0.45 lead 12.35 0.1 13.9 0.2 7.5 0.2 window 10.5 0.2 photosensitive surface case 0.5 max. the glass window may extend a maximum of 0.2 mm beyond the upper surface of the cap. kapda0014ea dimensional outlines (unit: mm) kapda0016eb S5345 s9073, s9074, s5343 s9075, s5344 kapda0015ea 4
|
